Avaya office 5410 Manual Do Utilizador

Function Key Programming 

Function Keys - Page 41 

IP Office 5410 User’s Guide 

Function Keys - Page 41 

40DHB0002UKEY – Issue 1 (7th February 2005) 

Function Key Programming 

Sets the extension's group membership as disabled. This function does not take the 
Hunt Group Out of Service. 
This function can be programmed with or without a target group number. This function 
cannot be programmed through the phone by the user.  
If programmed without a group number, pressing 

 HGDis disables all the 

extension's group memberships.  
If programmed with a group number, pressing 

 HGDis disables just the extension's 

membership of that group. 
 

[User | Digital Telephony | Advanced | Hunt Group | Hunt Group Disable] 

  

Put a specific hunt group into night service mode.  
This function requires the hunt group number to be entered when programmed. The 
hunt group number is then shown next to HGNS+. This function can be programmed 
through the phone by the user using an 

 Admin key.  

Pressing 

 HGNS+ puts the hunt group into night service. Group calls then go to its 

night service fallback group if set or, if not answered, to voicemail.  
 

[User | Digital Telephony | Advanced | Set | Set Hunt Group In Service] 
  

Returns a hunt group that has been manually put into night service back to normal 
service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 42. 
This function requires that the hunt group number is entered when programmed. This 
function cannot be programmed through the phone by the user.  
The hunt group number is shown next HGNS-. Pressing 

 HGNS- puts the group 

back into normal service if in night service.  
 

[User | Digital Telephony | Advanced | Call | Clear Hunt Group Night Service] 
  

 

Put a specific hunt group out of service mode.  
This function requires the hunt group number to be entered when programmed. The 
hunt group number is then shown next to HGOS+. This function cannot be 
programmed through the phone by the user.  
Pressing 

 HGOS+ puts the hunt group out of service. Group calls then go to its out 

of service fallback group if set or, if not answered, to voicemail.  
 

[User | Digital Telephony | Advanced | Set | Set Hunt Group Out Service] 
  

Returns a hunt group that has been manually put into out of service back to normal 
service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 42. 
This function requires that the hunt group number is entered when programmed. This 
function cannot be programmed through the phone by the user.  
The hunt group number is shown next HGOS-. Pressing 

 HGOS- puts the group 

back into normal service if in night service.  

[User | Digital Telephony | Advanced | Call | Clear Hunt Group Out Of Service]