Avaya null 3711 Manual Do Utilizador

The telephone can be manually registered on up to 10 different DECT systems.  Before you can 
make a call via the DECT system, the telephone has to be registered to the system. A system 
ID and registration code are necessary for the registration process. When the telephone is not 
subscribed to the system the display will show ”Please, subscribe”.

This is for information only. Please contact your System Administrator to register the telephone.

All settings in this chapter are started by pressing the softkeys:

Menu 

 System OK 

 Subscription OK Options 

 New / OK IPEI: 012......OK PARK  OK

 PIN Authentication code OK System 

name 

OK 

Local phone number OK

The following entries must be made when logging on:

Enter PARK: A system ID should only be entered if you are at a location where two DECT 
systems overlap. If only one DECT system is available, then just press OK.

Enter Auth.Code: This code is used to get access to register the telephone (authentication 
code). The DECT System supplies this code.

Enter System Name: Enter the name of the DECT system which you are registering. This 
will be shown on the idle display. For information concerning the entry of characters, refer to 

Enter Local Number: the phone number, assigned to your DECT telephone can be 
entered here (ask your system administrator for the phone number).

 Subscription OK 

 select a System Options Select OK 

If the telephone has been registered to several DECT systems, then you can select which one 
the telephone is to be used with. Select the system via the arrow keys before confirming 
”Select”. By choosing Options Select, the function automatic search is disabled. The selected 
system is shown in the idle display.