Avaya cm012 Manual Do Utilizador

Package Contents:
(1) CM012 - Friction dashboard mount 
or SM012 Mini Friction Dashboard Mount
(1) Optional adhesive safety hook (recommended but not required)
(1) Alcohol cleaning pad

Compatibility Notes: 
• This mount will work with all windshield suction pedestals, regardless 
   of manufacturer, with a suction cup of 80mm max.

Adhesive 
Safety Hook

i

Place the suction cup of the windshield pedestal (sold 
separately, not included) down on the mounting surface in 
the center of the dash mount.  Secure the pedestal to the 
mount before attaching a holder or device (sold separately, 
not included).

Step 1.

Do not place mount in or near an air bag deployment 
zone or where it will obstruct view of the road.

Patent Pending

CM012 Friction 
Dashboard Mount

Arcadia, CA 91006 USA

Designed in USA | Made in China

© Copyright 2010 Arkon Resources, Inc.

Consumer Hotline:
USA     (800) 841-0884
INT’L    (626) 254-9005
Monday - Friday 9 am - 5 pm, PST

®

Safety Precautions
Follow all manufacturer safety guidelines for operating your device.  Failure to 
practice safe usage of GPS device while driving may result in damage, injury, or 
death.  Do not install Arkon products over an air bag cover or within the air bag 
deployment zone. 

Arkon is not responsible for any damages caused to your car, your device, or 
yourself due to the installation or use of this pedestal mount.

Find a safe location on the vehicle dashboard that is not in an air  
bag deployment zone. 

Optional Safety hook installation will add extra stability.
Clean the area with the included alcohol pad and let dry.  Remove 
the adhesive backing on the safety hook base.  The hook curve 
must point towards the windshield.  Press and hold the hook 
down on the dashboard surface for about a minute.  Allow 24 hrs. 
to cure to the dashboard at room temperature (72° F).

Place the loop on the back of the dashboard mount around the 
safety hook and place on the dashboard in front of the hook.  
Remove protective fi lm from the pedestal mounting surface (A).

Step 1.

Step 2.

Step 3. 

A