Avaya ip office 4400 Manual Do Utilizador

You can park a call or several calls. You are then free to make and receive 
other calls. You can also arrange for the parked call to be retrieved by 
another extension. 
Note that the system only allows calls to be parked for a short while before 
reconnecting them, the default setting is 5 minutes. 
When you park a call it is given number based on your extension number 
followed by 0. If you now park another call that is given your extension 
number followed by 1. If you inform another extension of the number given 
to a parked call, they can then unpark that call (see below). 
4406D+, 4606D+ and TransTalk

®

 MDW 9040 users can use the shortcode 

or a programmed button for this operation.  
To park a call: 
1.  During a call, press Menu 

. 

2. Using the  and   keys, display and then select CPark (This feature can 

also be set under a DSS key, see page 22). The caller is parked and 
your phone displays a P as a reminder. 

or 
1.  During a call, press Menu 

 twice. 

2. Select Func and then select CPark. The caller is parked and your 

phone displays a P as a reminder. 

 
To retrieve the parked call at your extension: 
1. Press Menu 

. 

2. Using the  and   keys, display and then select CPark. 
3.  The display shows the parked calls as your extension number plus a 

number for the order in which it was parked. For example, for extension 
206, the first parked call is 2060, the next parked call is 2061. 

4.  Select the call to unpark. 
or 
1. Press Menu 

 twice. 

2. Select Func and then select CPark. 
3.  The display shows the parked calls as your extension number plus a 

number for the order in which it was parked. For example, for extension 
206, the first parked call is 2060, the next parked call is 2061. 

4.  Select the call to unpark. 
To retrieve a parked call at another extension: 
1.  At any extension on the system, dial *38*N# where N is the number that 

was assigned to the parked call (usually the parking extension number 
followed by 0) of the parked call. 
•  For example: To unpark the first call parked by 206, dial *38*2060#. 

To display parked calls: 
1. A P on your display indicates that you have a parked call. 
2. Press Menu 

 twice. 

3. Select HC&P (held, conference and parked). 
4. The   above Parks indicates that there are parked calls. Select Parks. 
5.  The displays show the parked calls using the number assigned to each 

parked call. 

6.  To unpark a particular call, press the display key under the parked call.