Avaya ipm525-s Manual Do Utilizador

CM088-TS-2
15” Flexible Floor Mount

SP-CM088-SBH
360º Swivel SBH Head
(optional)

Floor Mount

Console Mount

Screw the fl exible steel shaft into the seat track bolt bracket.

With a socket wrench, loosen the passenger seat track bolt, in-
sert the seat track bolt bracket, and retighten the seat track bolt.

Step 1. 

Step 2.

Position the Floor/Console Bracket and drill into the fl oor or console.

Attach the Floor / Console Bracket with screws and cover with 
plastic caps.

Screw the steel shaft into the Floor / Console Bracket.

Step 1. 

Step 2.

Step 3.

Adjust the steel shaft by bending with both hands to the 
desired location of the male dual T head. 

Use the adjustment knob and wing nut on the pedestal head to 
swivel or rotate the head position if necessary.

Step 1.

Step 2.

For a more permanent mount, connect the Floor / Console Mount Bracket 
to the fl oor or console.  This will require drilling into your vehicle’s 
interior surface.

For a simple mount that can be easily moved to another vehicle, install 
using the passenger seat track bolt.

Safety Precautions
Do not install Arkon products over an air bag cover or within the air 
bag deployment zone.  Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or      
air bag deployment. 

Arkon is not responsible for any damages caused to your car, your 
device, or yourself due to the installation or use of this pedestal mount.

Drilling into the dash, fl oor, or console will permanently damage 
the vehicle. Use caution and consult a mobile install professional 
to avoid drilling into  the gas tank, electrical system or other highly 
sensitive vehicle components.

Do not place mount in or near an air bag deployment zone or 
where it will obstruct view of the road.

Compatible with the following devices:

Apple iPhone® 4

• 

Apple iPhone® 3GS

• 

Apple iPhone® 3G

• 

Apple iPhone® Original

• 

Apple iPod touch® - All models

• 

*Apple®, iPhone®, and iPod touch® are trademarks of Apple Computer, Inc. Arkon Resources, Inc. is not affi  liated with Apple Computer, Inc.

Do not place mount in or near an air bag deployment zone or where it 
will obstruct view of the road.

(1) CM088-TS-2 - 15” Flexible steel gooseneck fl oor or console mount

      Includes: (1) Seat Bolt Bracket, (1) Floor / Console Bracket, (4)Screws,

  

     (4) Plastic Caps, and (1) Flexible Steel Shaft with Plastic Tubing

(1) SM050-2 - Slim-Grip™ holder for Apple iPhone and iPod touch®

(1) SP-CM088-SBH - 360º Swivel SBH Head (optional)

SM050-2 
Slim-Grip™ Holder for 
iPhone & iPod touch

Consumer Hotline:
USA     (800) 841-0884
INT’L    (626) 254-9005
Monday - Friday 9 am - 5 pm, PST

Arcadia, CA 91006 USA

Designed in USA | Made in China and Taiwan

© Copyright 2010 Arkon Resources, Inc.