Avaya P332G-ML Manual Do Utilizador

Chapter 4        Installation

Avaya P332G-ML User’s Guide

23

Making Connections to Network Equipment

This section describes the physical connections that you can make between the 
Avaya P330 switch and other network equipment.

Make sure you have the following before attempting to connect network equipment 
to the P330 switch:
•

A list of network equipment to be connected to the P330 switch, detailing the 
connector types on the various units 

•

All required cables (see below). Appropriate cables are available from your 
local supplier.

P332G-ML switches include the following types of ports (according to the speed 
and standard they support):  SFP GBIC 
To connect the cables:
1

Insert an SFP GBIC (Small Form Factor Plugable Gigabit Interface Converter) 
transceiver (not supplied) to the port housing. For a list of approved SFP GBIC 
transceivers, see www.avayanetwork.com. For fiberoptic cable properties, see 
Table 4.4.

L GBICs are 3.3V. 
2

Connect the Ethernet fiberoptic cable (not supplied) to the GBIC transceiver on 
the front panel of the Avaya P332G-ML. You can use LC or MT-RJ fiberoptic 
cables depending on the GBIC transceiver you are using.

3

Connect the other end of the cable to the Ethernet port of the PC, server, router, 
workstation, switch, or hub.

4

Check that the appropriate link (LNK) LED lights up.