Avaya P332G-ML Manual Do Utilizador
Chapter 8 User Authentication
Avaya P332G-ML User’s Guide
55
Allowed Protocols
Allowed Protocols Introduction
With the Allowed Protocols feature, the network manager can determine the IP
protocols enabled on the switch. This feature can be used to block access to the
switch using specific IP protocols. Each protocol can be independently enabled or
disabled on the switch.
L Enabling and disabling the Recovery Password protocol can only be done using
protocols enabled on the switch. This feature can be used to block access to the
switch using specific IP protocols. Each protocol can be independently enabled or
disabled on the switch.
L Enabling and disabling the Recovery Password protocol can only be done using
a direct console connection via the Console port.
Allowed Protocols CLI Commands
The following Allowed Protocols commands are available.
In order to...
Use the following command...
Enable Telnet on the switch
ip telnet enable
Disable Telnet on the switch
no ip telnet
Enable HTTP on the switch
ip http enable
Disable HTTP on the switch
no ip http
Enable the switch agent to accept
ICMP redirect packets sent to it
ICMP redirect packets sent to it
ip icmp redirect
Enable the switch agent to ignore
ICMP redirect packets sent to it
ICMP redirect packets sent to it
no icmp redirect
Enable SNMP on the switch
snmp-server
Disable SNMP on the switch
no snmp-server
Enable SNMPv1 switch access
snmp-server community
Disable SNMPv1 switch access
no snmp-server community
Enable SSH on the switch
ip ssh enable
Disable SSH on the switch
no ip ssh
Enable Recovery Password on the
switch
switch
terminal recovery password enable
Disable Recovery Password on the
switch
switch
no terminal recovery password