HP ml310 Manual Do Utilizador

 

Part 15 of the Federal Communications Commission (FCC) Rules and 
Regulations has established Radio Frequency (RF) emission limits to provide an 
interference-free radio frequency spectrum. Many electronic devices, including 
computers, generate RF energy incidental to their intended function and are, 
therefore, covered by these rules. These rules place computers and related 
peripheral devices into two classes, A and B, depending upon their intended 
installation. Class A devices are those that may reasonably be expected to be 
installed in a business or commercial environment. Class B devices are those that 
may reasonably be expected to be installed in a residential environment (for 
example, personal computers). The FCC requires devices in both classes to bear 
a label indicating the interference potential of the device as well as additional 
operating instructions for the user. 

 

The FCC rating label on the device shows the classification (A or B) of the 
equipment. Class B devices have an FCC logo or ID on the label. Class A 
devices do not have an FCC logo or ID on the label. After you determine the 
class of the device, refer to the corresponding statement. 

 

This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful 
interference, in which case the user will be required to correct the interference at 
personal expense.