HP ml310 Manual Do Utilizador
18
HP ProLiant ML310 Generation 3 Server User Guide
Activity
LED (1)
LED (1)
Online
LED (2)
LED (2)
Fault LED
(3)
(3)
Interpretation
Flashing Flashing Flashing Do not remove the drive. Removing a drive may cause data
loss in non-fault-tolerant configurations.
Either (1) the drive is part of an array being selected by an array
configuration utility; (2) Drive Identification has been selected in
HP SIM; or (3) drive firmware is being updated.
configuration utility; (2) Drive Identification has been selected in
HP SIM; or (3) drive firmware is being updated.
Off
Off
On
The drive has been placed offline due to hard disk drive failure of
subsystem communication failure.
subsystem communication failure.
You may need replace the drive.
Off
Off
Off
Either (1) the drive is not configured as part of an array; (2) the
drive is configured as part of an array, but it is a replacement drive
that is not being accessed or being rebuilt yet; or (3) the drive is
configured as an online spare.
drive is configured as part of an array, but it is a replacement drive
that is not being accessed or being rebuilt yet; or (3) the drive is
configured as an online spare.
If the drive is connected to an array controller, you may replace the
drive online.
drive online.
Hot-plug SATA or SAS IDs