HP ml310 Manual Do Utilizador

 

13.

 Press the Esc key to exit the utility. 

 

To install an OS, download the SATA RAID driver and create a driver diskette 
with the software and instructions from the HP website 
(

SmartStart 7.4 does not support assisted installation of an OS on servers 
configured with SATA RAID. 

After inserting the SmartStart CD in the CD-ROM drive, a warning may indicate 
that the primary controller is not supported by this version of the SmartStart 
software. When this warning appears, use the following information to install the 
OS. 

 

  NOTE:  For systems with Microsoft® Windows® Server 2003 and 

HP embedded drivers installed, install the OS by booting the server and 
inserting the OS CD. The server locates and installs the driver. 

1.

  Insert the OS CD and reboot the system. 

2.

  When prompted, press the F6 key to install a third-party driver. 

  NOTE:  Press F6 within 5 seconds to enable the system to 

recognize the controller. If the system fails to recognize the controller, 
restart this procedure. 

3.

  Insert the SATA RAID driver diskette created earlier. The system prompts 

the next action. 

4.

  Press the S key to specify the driver from the diskette. Then, press the Enter 

key. The OS searches the diskette for a suitable driver. 

5.

  After locating the Adaptec Embedded Serial ATA HostRAID driver, press 

Enter. 

6.

  Follow the remaining on-screen instructions to complete the installation.