HP ml310 Manual Do Utilizador

 

Management Agents provide the information to enable fault, performance, and 
configuration management. The agents allow easy manageability of the server 
through HP SIM software, and third-party SNMP management platforms. 
Management Agents are installed with every SmartStart assisted installation or 
can be installed through the HP PSP. The Systems Management homepage 
provides status and direct access to in-depth subsystem information by accessing 
data reported through the Management Agents. For additional information, refer 
to the Management CD in the HP ProLiant Essentials Foundation Pack or the HP 
website (

 

HP SIM is a web-based application that allows system administrators to 
accomplish normal administrative tasks from any remote location, using a web 
browser. HP SIM provides device management capabilities that consolidate and 
integrate management data from HP and third-party devices. 

  IMPORTANT:  You must install and use HP SIM to benefit from the 

Pre-Failure Warranty for processors, SCSI hard drives, and memory 
modules. 

For additional information, refer to the Management CD in the HP ProLiant 
Essentials Foundation Pack or the HP SIM website 
(

 

HP provides both standard USB support and legacy USB support. Standard 
support is provided by the operating system through the appropriate USB device 
drivers. HP provides support for USB devices before the operating system loads 
through legacy USB support, which is enabled by default in the system ROM. 
HP hardware supports USB version 1.1 or 2.0, depending on the version of the 
hardware. 

Legacy USB support provides USB functionality in environments where USB 
support is normally not available. Specifically, HP provides legacy USB 
functionality for: