HP procurve 2500 Manual Do Utilizador
161
Enhancements in Release F.02.11
Fast-Uplink Spanning Tree Protocol (STP)
Fast-Uplink Spanning Tree Protocol (STP)
Fast-Uplink Troubleshooting
Some of the problems that can result from incorrect usage of Fast-Uplink STP include temporary
loops and generation of duplicate packets.
loops and generation of duplicate packets.
Problem sources can include:
■
Fast-Uplink is configured on a switch that is the STP root device.
■
Either the
Hello Time
or the
Max Age
setting (or both) is too long on one or more switches.
Return the
Hello Time
and Max Age settings to their default values (2 seconds and 20 seconds,
respectively, on a Series 2500 switch).
■
A "downlink" port is connected to a switch that is further away (in hop count) from the root
device than the switch port on which fast-uplink STP is configured.
device than the switch port on which fast-uplink STP is configured.
■
Two edge switches are directly linked to each other with a fast-uplink (Mode =
Uplink
)
connection.
■
Fast uplink is configured on both ends of a link.
■
A switch serving as a backup STP root switch has ports configured for fast-uplink STP and
has become the root device due to a failure in the original root device.
has become the root device due to a failure in the original root device.