HP ProLiant DL360 Manual Do Utilizador

Wide Ultra3 SCSI

32-bit RISC

Hardware RAID

Low Voltage Differential (LVD)

2

Channel Transfer Rate 320 MB/s total; 160 MB/s per channel

SCSI Port Connectors One external and one internal SCSI port

NOTE: The ProLiant DL360 Generation 2 (G2) does not offer an
external SCSI port.

32 MB of DRAM used for code, transfer buffers, and non-battery-
backed read cache

160 MB/s

32

YES

RAID 5 (Distributed Data Guarding)

NOTE: A minimum of 3 hard drives are required for RAID 5 and only 2
are supported on the ProLiant DL360 Generation 2 (G2). Therefore
RAID 5 is not supported on the ProLiant DL360 Generation 2 (G2).

RAID 1+0 (Striping and Mirroring)
RAID 1 (Mirroring)
RAID 0 (Stripping)

Ultra2 and Ultra3

10/100/1000-T

EEE 802.3 10Base-T

IEEE 802.3ab 1000Base-T

IEEE 80.3u 100Base-TX

Data Transfer Method 64-bit/66MHz PCI-X

10Base-T (Half-Duplex),
10Base-2

10 Mb/s

10Base-T (Full-Duplex)

20 Mb/s

100Base-TX (Half-Duplex)

100 Mb/s

100Base-TX (Full-Duplex)

200 Mb/s

1000Base-TX

1000 Mb/s

RJ-45

 

10Base-T

Categories 3, 4 or 5 UTP
up to 328 ft (100 m)

100Base-TX

Category 5 UTP up to 328 ft (100 m)

DA - 11049   Worldwide QuickSpecs — Version 35 — 9.30.2003

Page 42