HP psc 1200 Manual Do Utilizador

reference guide

quick start

7

Review the table below to become familiar with the front-panel status lights that 
provide information about tasks that are currently being performed by your 
HP PSC.

In addition to providing information about current tasks, the lights on the front 
panel may also indicate error conditions, as described in the table below.

If the On light, Check Print Cartridge light, Check Paper light, and Start Copy, 
Black and Start Copy, Color lights are all flashing, do the following:

Verify that the front-panel overlay is attached to the HP PSC.

Power cycle your HP PSC by disconnecting the power cord and 
reconnecting.

On/Resume

Check Paper

Cancel

Check Print Cartridge

The On light 
is not 
illuminated.

Light is off. Light is off.

Your HP PSC is turned off. Press the On button to turn 

your HP PSC on.

The On light 
is illuminated.

Light is on. Light is on.

Your HP PSC is turned on 
and is ready for use.

Begin a scan, copy, or 
print job from the front 
panel or from the software.

The On light 
is blinking

Light is on. Light is on.

Your HP PSC is processing 
a Print, Scan, or 
Maintenance job.

Wait for your HP PSC to 
finish processing the job.

The On light 
is blinking

Light is 
blinking.

Light is on.

Your HP PSC is processing 
a black-and-white copy 
job that was started from 
the front panel or the 
software.

Wait for your HP PSC to 
finish processing the job.

The On light 
is blinking

Light is on. Light is 

blinking.

Your HP PSC is processing 
a color copy job that was 
started from the front 
panel or the software.

Wait for your HP PSC to 
finish processing the job.

Blinks faster 
for 3 seconds 
and then 
stays 
illuminated.

Light is on 
or blinking.

Light is on 
or blinking.

Your HP PSC is busy 
doing another task.

Wait for the current job to 
be completed before 
starting another job.