HP scanjet 4600 series Manual Do Utilizador

1

Scanner

2

Vertical holder, with folding legs for storage. Used for positioning and
holding items for scanning

3

Optional transparent materials adapter (TMA) for scanning 35 mm slides
and negatives.

4

Power supply

The holder can be used for holding the scanner, positioning items to
scan, and providing a flat surface on which to scan. The holder is not
necessary for scanning.

Place the scanner in the horizontal holder (HP Scanjet 4600/4630)
1

Set the horizontal holder on a flat surface.
Make sure the hinge in the holder is rotated
forward.

2

Lay the scanner on the holder, viewing side
(light frame) up (

), in contact with the

hinge. The buttons face away from the
hinge. The cord exits the scanner next to
the hinge.

3

Press the back of the scanner down until it
clicks into place in the hinge.

Place the scanner in the vertical holder (HP Scanjet 4650/4670)
1

Make sure both legs are fully extended before placing the
scanner in the holder. This ensures the holder is stable.
Open the support legs by rotating them into place:
a

Open the rear support first, and then make sure it
clicks into the fully open position.

b

Rotate the front support from behind the holder to the
front of the holder until it clicks into place.

2

Set the holder on a flat surface.

How to use the scanner