Canon DC210 Manual Do Utilizador
Recording
30
manually. To play back on a TV with normal
aspect ratio (4:3) change the [TV TYPE] setting
accordingly (
aspect ratio (4:3) change the [TV TYPE] setting
accordingly (
41).
Taking Photos
1
Move the power switch to ON to set
the camcorder in CAMERA mode.
the camcorder in CAMERA mode.
The red CAMERA indicator will turn
on.
on.
2
Move the lens cover switch down to
to open the lens cover.
3
Move the
/
switch to the
(Still images) position.
4
Press
halfway.
Once the focus is automatically
adjusted, will turn green and one or
more AF frames will appear.
adjusted, will turn green and one or
more AF frames will appear.
5
Press
fully.
The DISC access indicator will flash
as the still image is being recorded.
as the still image is being recorded.
IMPORTANT
Avoid the following actions while the disc
access display (
access display (
) appears on screen, and
when the DISC access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to vibrations or
strong impacts.
- Do not open the disc cover and do not remove
the disc.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to vibrations or
strong impacts.
- Do not open the disc cover and do not remove
the disc.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
/
switch or the operating mode.
NOTES
If the subject is not suitable for autofocus,
turns yellow. Adjust the focus manually
(
(
46).
(
12)
PHOTO
PHOTO
D121C_NTSC-E.book Page 30 Thursday, January 11, 2007 2:46 PM