Canon EOS-1D Mark II N Manual Do Utilizador

4-4

O

The 

 shown in this section provides brief descriptions of the Custom Function Settings 

for the respective camera functions. For more details, refer to “Custom Function Settings” in 
the camera’s Instruction Manual.

O

Checkmark the shooting modes you do not want to use.

O

Unwanted shooting modes can be skipped while you are selecting the shooting mode.

O

This makes selecting the desired shooting mode faster.

O

O

Checkmark the metering modes you do not want to use.

O

Unwanted metering modes can be skipped while you are selecting the metering mode.

O

This makes selecting the desired metering mode faster.

O

Select the metering mode to be specified.

O

You can specify the metering mode to be used in the manual exposure mode. 

O

When you set the manual exposure mode, the metering mode selected here will be set 
automatically. In the manual exposure mode, this enables you to use a metering mode 
different from the one used in the AE modes. 

At least one checkbox must be left unchecked.

At least one checkbox must be left unchecked.

O

Select the maximum and minimum shutter speeds from the list box.
For example, if you set 1/2000 sec. as the fastest shutter speed and 1/60 sec. as the 
slowest, the shutter speed range will be 1/2000 to 1/60 sec.

O

This makes shutter speed selection faster and prevents a slow-speed sync. in aperture-
priority AE mode with the flash.

O

Select the maximum and minimum apertures from the list box.
For example, if you set 1.4 for the largest aperture and 8.0 for the smallest aperture, the 
usable aperture range will be f/1.4 to f/8.0.

O

You can better control the apertures used by setting the range of usable apertures.

O

If you set the maximum and/or minimum shutter speed to one that is not a full-stop 
increment (such as 1/750 sec.), the controllable and settable shutter speed range 
might not be as exact as you set it (A slight deviation may occur.). This applies if you 
also set Custom Function C.Fn-6-1 and C.Fn-6-2 and set the maximum and/or 
minimum shutter speed to one that is not a full-stop increment (such as 1/3200 sec.).

O

To ensure that a proper flash sync speed is set in the Program AE mode, a shutter 
speed range of 1/200 sec. to 1/80 sec. cannot be set with the EOS-1D Mark II N, 
EOS-1Ds Mark II, EOS-1D Mark II and EOS-1Ds, and the range of 1/400 sec. to 1/80 
sec. cannot be set with the EOS-1D.

O

If safety shift has been enabled (with C.Fn-16), it will override P.Fn-04’s shutter speed 
range.

O

Specify a minimum aperture value that is smaller than the maximum aperture setting. 
If you select a minimum aperture value that is larger than the maximum aperture, a 
warning message appears and the setting reverts to the default value.

O

If you set the maximum and/or minimum aperture to one that is not a full-stop 
increment (such as f/4.5), the controllable and settable aperture range might not be 
as exact as you set it (A slight deviation may occur.). This applies if you also set 
Custom Function C.Fn-6-1 or C.Fn-6-2 and set the maximum and/or minimum 
aperture to one that is not a full-stop increment (such as f/6.3).

O

If the largest aperture of the attached lens is smaller than the largest aperture you set 
with P.Fn-05, the largest aperture will be set to the lens’ largest aperture. And if the 
largest aperture of the attached lens is smaller than the smallest aperture you set with 
P.Fn-05, the aperture will be set and fixed to the lens’ largest aperture.

O

If safety shift has been enabled (with C.Fn-16), it will override P.Fn-05’s aperture 
range.