Canon EOS-1D Mark II N Manual Do Utilizador

4-8

O

You can use this function to select the default mode settings when you press the <CLEAR> 
button.

O

Convenient when you want to instantly switch to frequently-used settings.

O

Normally, the shutter-release time lag is controlled for stability. This Personal Function 
eliminates this control. As a result, the shutter-release time lag can be reduced by as much 
as about 20 percent when the aperture needs to be stopped down by no more than 3 stops.

O

This is effective when a shorter shutter-release time lag is more important than a stable 
shutter-release time lag.

O

Enables the electronic dial’s function to be used in the reverse 
direction

O

The electronic dial’s rotational function can be reversed for selecting the AF point and 
setting the shutter speed and aperture.

O

By matching the dial’s rotation direction to the particular operation, the operation can feel 
more intuitive.

O

The Quick Control Dial cannot be used to set exposure compensation.

O

This prevents exposure compensation from being set accidentally while the AF point is 
being selected.

Since the difference is in 10-millisecond increments, the time lag may not feel any 
shorter.

When the main dial’s rotational function is reversed, the horizontal AF point selection 
direction does not change.

O

Setting the Quick Control Dial switch to <OFF> disables the Main and Quick Control Dials.

O

O

Select which part of an image is enlarged.

O

If you take the shot on the camera with this function [ON], you can enlarge an image.

O

For more imformation on using this function on the camera, see “P.Fn-30 Enlarging the 
image” in the EOS-1Ds Instruction Manual.

O

O

The data that shows whether or not the image is the original one can be added to the image.
When selecting the display format of Shooting information (INFO), the icon showing the 
captured image with Original image verification data is displayed.
For more details, refer to “Shooting Information Display” in the camera’s Instruction Manual.

O

For the decision of the original image, you will need the dedicated accessory (optional).

O

O

If you wish to enlarge an image, set P.Fn-30 to [ON] during shooting and playback. 
The image shot on the camera without setting P.Fn-30 to [ON] cannot be enlarged.

O

The image shot on any camera other than the EOS-1Ds cannot be enlarged.

The original decision data cannot be added to the JPEG or TIFF image converted from 
the RAW image.