Canon imageclass 2300 Manual Do Utilizador

Placing Originals

Introduction to Cop

ying

 

You can place an original either vertically or horizontally. Always align the top edge 
of your original with the back edge of the platen glass (by the arrow in the top left 
corner), or with the back edge of the feeder.

NOTE

 

If the top edge of the original is not aligned with the back edge of the platen glass (by the 
arrow in the top left corner), prints may not be made correctly, depending on the mode 
you have set.
LTR originals can be placed either vertically or horizontally. However, the scanning speed 
for horizontally placed originals is somewhat slower than for vertically placed originals. 
You can place originals horizontally when scanning with a Preset Zoom, such as when 
enlarging LTR   to 11" x 17"  .
Horizontally placed LTR originals are referred to as LTR  .
11" x 17" and LGL originals must be placed horizontally.
To get the same output result when you are using the feeder as when the original is 
placed on the platen glass, place the original upside-down and face up in the feeder.

ABC

ABC