Canon imageclass 2300 Manual Do Utilizador

Paper Selection

Basic Cop

ying F

eatures

This mode enables you to set the machine to automatically select the paper size, or 
to manually specify a paper size for a copy job.

NOTE

 

If you are copying an original onto the same size paper at a copy ratio of 100%, the 
periphery of the original image may be cut slightly on the copy. For details on the size of 
the margin areas, see Chapter 8, "Appendix," in the Reference Guide.
For instructions on loading paper into the stack bypass, see Chapter 2, "Basic 
Operations," in the Reference Guide.

 

The machine automatically selects the copy paper.

IMPORTANT

 

The Automatic Paper Selection mode can be used when copying on the following paper 
sizes: 11'' x 17'', LGL, LTR, and STMT.
You cannot use the Automatic Paper Selection mode when copying the following types of 
originals. Copy these originals using the Manual Paper Selection mode.
- Nonstandard size originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- Originals smaller than STMT
If the machine is operating in the Automatic Paper Selection mode, you cannot use the 
Auto Zoom mode, or Image Combination mode.

NOTE

 

The default setting is 'AUTO PAPER'.
You can set whether to activate or deactivate the Automatic Paper Selection for each 
paper drawer and the stack bypass. (See Chapter 3, "Selecting and Storing Settings," in 
the Reference Guide.)
You can use the stack bypass for the Automatic Paper Selection when:
- The paper has already been placed in the stack bypass
- The paper size is specified in 06 USE STACK BYPASS in the Common Settings menu
- The Automatic Paper Selection mode is set to '02 ON' for the stack bypass in the 

DRAWER ELIGIBLTY menu. (See Chapter 3, "Selecting and Storing Settings," in the 
Reference Guide.)