Canon imageclass 2300 Manual Do Utilizador

Changing the Copy (Zoom) Ratio

Basic Cop

ying F

eatures

➞ press [OK].

If you make a mistake when entering the value, press 

 (Clear), and enter the 

correct value.

If you enter a value outside the setting range, an error tone sounds. If the value 
you entered is less than 50, the copy ratio is automatically changed to 50%. If the 
value you entered is greater than 200, the copy ratio is automatically changed to 
200%. Enter a value within the setting range.

The selected mode is set, the Copy Basic Features screen returns, and the 
selected copy ratio is displayed.

Copying starts.

NOTE

 

To return the copy ratio to 100%, press 

 (COPY RATIO) 

➞  

(DIRECT 

100%).
To cancel all settings and restore the machine's standard settings, press 

 

(Reset).

 

This mode enables you to have the machine automatically select the appropriate 
copy ratio based on the size of the original and the selected copy paper. The 
available copy ratios are from 50% to 200%.

IMPORTANT

 

You cannot use the Auto Zoom mode with Automatic Paper Selection.
You cannot copy highly transparent originals, such as transparencies, using the Auto 
Zoom mode. Use the Preset Zoom or Zoom Designation modes.
To use the Auto Zoom mode, your originals must conform to a standard paper size: 11'' x 
17'', LGL, LTR, LTR  , or STMT.

 lights, and the Copy Basic Features screen appears.