Canon imageclass 2300 Manual Do Utilizador

Frame Erase

Special Cop

ying F

eatures

For details about entering the copy quantity, see "Specifying the Required 
Number of Copies," on p. 2-2.

Copying starts.

NOTE

 

If you want to cancel this mode, press 

 (Stop) 

➞ the cancel job display appears 

➞ press 

 (YES) or 

 (NO).

If you press 

 (Stop) after copying has started, some blank sheets of paper may 

print out.
To cancel all settings and restore the machine's standard settings, press 

 

(Reset).
Set the frame erase width around the original using the COPY SETTINGS menu in 
the Additional Functions menu. You can set from 1 mm to 20 mm. (See "Frame 
Erase Width," on p. 4-8.)

 

This mode erases the shadows that appear in copies from binding holes on 
originals.

IMPORTANT

 

If the machine is operating in the Hole Punch Erase mode, you cannot use the Two-Page 
Separation, or Different Size Originals modes.
Do not place originals with binding holes in the feeder, as this may damage the originals.

 lights, and the Copy Basic Features screen appears.