Canon i860, i865 Manual Do Serviço
1. MAINTENANCE
1.1 Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
Adjustment Timing
Purpose Tool
Approx.
time
EEPROM
initialization
(EEPROM settings)
initialization
(EEPROM settings)
At logic board ass’y
replacement
replacement
To initialize settings other
than the following:
- USB serial number
- Destination setting
- Waste ink counter
- Media sensor correction
than the following:
- USB serial number
- Destination setting
- Waste ink counter
- Media sensor correction
value
- CD-R correction value
None. 1
min.
Destination settings
(EEPROM settings)
(EEPROM settings)
At logic board ass’y
replacement
replacement
To set the destination.
None.
1 min.
Waste ink counter
resetting
resetting
- At bottom case unit
replacement
- At ink absorber
(QC1-2232 / 2233 /
2234 / 2235 / 2236)
replacement
2234 / 2235 / 2236)
replacement
To reset the waste ink
counter.
counter.
None. 1
min.
Media sensor
correction
correction
*1
(EEPROM settings)
- At logic board ass’y
replacement
- At sheet feeder unit
replacement
To correct the media
sensor.
sensor.
Calibration media
kit (QY9-0064)
kit (QY9-0064)
*2
2 min.
CD-R sensor /
automatic print head
alignment sensor
correction
(EEPROM settings)
automatic print head
alignment sensor
correction
(EEPROM settings)
- At logic board ass’y
replacement
- At carriage unit
replacement
To correct the CD-R and
automatic print head
alignment sensor.
automatic print head
alignment sensor.
None.
(Correction
performed
through service
test print)
(Correction
performed
through service
test print)
1 min.
Print head alignment
- At print head
replacement
- At logic board ass’y
replacement
To ensure accurate dot
placement.
placement.
- None.
(printer buttons)
- Computer
(printer buttons)
- Computer
(settings via the
printer driver)
printer driver)
2 min.
Paper feed motor
position adjustment
position adjustment
*3
At paper feed motor unit
replacement
replacement
To adjust the belt tension.
(Position the paper feed
motor so that the belt is
stretched tight.)
(Position the paper feed
motor so that the belt is
stretched tight.)
None. 2
min.
Grease application
- At carriage unit
replacement
- At paper guide flapper
ass’y (QL2-0341)
replacement
replacement
- At lift cam base’s
(QL2-0340) gear
replacement
replacement
- At lift cam shaft unit
(QM2-0593)
replacement
replacement
- To maintain sliding
properties of the carriage,
carriage shaft, paper
guide flapper, and lift
cam shaft.
carriage shaft, paper
guide flapper, and lift
cam shaft.
- To protect the lift cam
base gear.
- FLOIL
KG-107A
(QY9-0057)
(QY9-0057)
- MOLYKOTE
PG641
(CK-0562)
(CK-0562)
2 min.
Note: DO NOT loosen the red screws on both sides of the main chassis, securing the carriage shaft positioning.
*1: Media sensor correction
*1: Media sensor correction
This operation adjusts the correction value of the media sensor, installed in the sheet feeder unit, to the
EEPROM of the logic board ass’y. The adjustment is required when the sheet feeder unit or the logic board
ass’y is replaced, and values are automatically determined via use of calibration media kit (QY9-0064).
EEPROM of the logic board ass’y. The adjustment is required when the sheet feeder unit or the logic board
ass’y is replaced, and values are automatically determined via use of calibration media kit (QY9-0064).
*2: Calibration media kit
The service tool for media sensor correction, consisting of 10 sheets of the reference plain paper, and 1
1 - 1