Canon imageclass mf6560 Manual Do Utilizador
1
2
3
4
5
6
7
8
Back
7-9
■
Receiving Problems
Cannot receive a fax automatically.
Q
Is the machine set to receive automatically?
A
For the machine to receive faxes automatically,
receive mode must be set to <FaxTel>, <FaxOnly>,
or <AnsMode>. If you have set <AnsMode>,
confirm that an answering machine is connected to
the machine and that it is turned on with an
outgoing message properly recorded. (See
“Setting Receive Mode,” on p. 1-8.)
receive mode must be set to <FaxTel>, <FaxOnly>,
or <AnsMode>. If you have set <AnsMode>,
confirm that an answering machine is connected to
the machine and that it is turned on with an
outgoing message properly recorded. (See
“Setting Receive Mode,” on p. 1-8.)
Q
Is a document stored in memory, leaving little
or no memory available?
or no memory available?
A
Print, send, or delete any documents stored in
memory.
memory.
Q
Has an error occurred during reception?
A
Check the LCD for an error message. (See
Chapter 12, “Troubleshooting,” in the Basic Guide.)
Chapter 12, “Troubleshooting,” in the Basic Guide.)
A
Print an Activity Report and check for an error.
(See “ACTIVITY REPORT,” on p. 6-5.)
(See “ACTIVITY REPORT,” on p. 6-5.)
Q
Is paper loaded in the machine?
A
Make sure paper is loaded in the machine. (See
“Set Up the Machine,” in the Starter Guide.)
“Set Up the Machine,” in the Starter Guide.)
Q
Is the telephone cable connected properly?
A
Make sure the cable is connected properly. (See
“Set Up the Machine,” in the Starter Guide.)
“Set Up the Machine,” in the Starter Guide.)
No automatic switching between telephone and fax calls.
Q
Is the machine set to switch automatically
between telephone and fax calls?
between telephone and fax calls?
A
For the machine to switch between fax and
telephone calls automatically, the receive mode
must be set to <FaxTel>, <AnsMode>, or <DRPD>.
If you have set <AnsMode>, confirm that an
answering machine is connected to the machine
and that it is turned on with an outgoing message
properly recorded. (See “Setting Receive Mode,”
on p. 1-8.)
telephone calls automatically, the receive mode
must be set to <FaxTel>, <AnsMode>, or <DRPD>.
If you have set <AnsMode>, confirm that an
answering machine is connected to the machine
and that it is turned on with an outgoing message
properly recorded. (See “Setting Receive Mode,”
on p. 1-8.)