Canon LBP-800 Manual Do Serviço
III. MAIN UNITS
A. Laser/Scanner Unit
1) Remove the external covers.
2) Disconnect the connector, and then
1) Remove the external covers.
2) Disconnect the connector, and then
remove the cable from the cable guide.
3) Remove the 2 screws, then the display
unit.
➀ Connector
➁ Cable guides
➂ Cable
➃ Screws
➄ Display unit
Figure 3-3-1
4) Remove the 2 screws, then the right
and left covers.
➀ Screws
➁ Covers
Figure 3-3-2
5) Remove the 2 screws and 2 claws, then
the duct.
➀ Screws
➁ Claws
➂ Duct
Figure 3-3-3
6) Remove the sponge.
➀ Sponge
Figure 3-3-4
<< Note for reassembly >>
Make sure to confirm the sponge attached,
when installing the duct.
Make sure to confirm the sponge attached,
when installing the duct.
CHAPTER 3
3 - 5
➀
➂
➀
➄
➁
➃
➁
➀
➁
➂
➀