Canon pixma ip4300 Manual Do Utilizador

Página de 102
32
Routine Maintenance
4
Prepare the replacement tank.
(1) Remove the new ink tank from its packaging, 
then pull the orange tape in the direction of the 
arrow (A) so that the protective film does not 
remain on the air hole (B). Then remove the 
film completely (C).
(2) Remove the orange protective cap from the 
bottom of the ink tank.
Discard the cap once it is removed.
Important
Make sure that all the orange tape has been peeled off 
along the perforation. If part of the orange tape is 
remaining, ink may leak out when you remove the 
protective cap and may not eject properly when 
printing.
Important
z
Be sure to remove the clear film from the ink tank in 
the exact order shown in step 4-(1), as failure to 
follow this step may cause the ink to leak and stain 
your clothes and hands.
z
Do not squeeze the side of ink tanks as this may 
cause the ink to leak out and stain your clothes and 
hands.
z
Do not re-attach the protective cap once you have 
removed it. Discard it according to the local laws 
and regulations regarding disposal of consumables.
z
Do not touch the open ink port once the protective 
cap is removed, as this may prevent the ink from 
being ejected properly. 
z
Be careful not to stain your clothes and hands with 
ink on the removed protective cap.
*2
(C)
(A)
*1
(B)
(1)
(2)
*1 Do not touch the electrical contacts 
on the ink tank. Doing so can cause 
the printer to malfunction or become 
unable to print.
*2 Carefully hold the protective cap 
when removing it to prevent the ink 
from staining your fingers.
downloadlike
ArtboardArtboardArtboard
Report Bug