Canon pixma ip4300 Manual Do Utilizador

Página de 102
39
Routine Maintenance
Print Head Cleaning
Clean the Print Head if lines are missing or if white streaks appear in the printed nozzle check 
pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the 
Print Head causes used ink to be absorbed in the ink absorber. Cleaning the Print Head consumes 
ink, so perform Print Head Cleaning only when necessary.
If you click Cleaning on the Pattern Check dialog box that is displayed after printing the nozzle 
check pattern, the Print Head Cleaning dialog box shown in of step 4-(3) in the following procedure 
will appear.
1
Make sure that the printer is on.
2
Press the Open Button to open the Paper Output Tray and extend the Output Tray 
Extension.
3
Open the printer properties dialog box.
4
 Start Print Head Cleaning.
(1) Click the Maintenance tab.
(2) Click Cleaning.
(3) Select the ink group to be cleaned.
When cleaning the nozzles of black ink tanks: 
Select Black to clean the nozzles of PGI-5BK, 
Color to clean the nozzles of CLI-8BK.
(4) Click Execute.
Print Head Cleaning starts when the POWER lamp starts flashing green.
Do not perform any other operations until Print Head Cleaning finishes. This takes about 
40 seconds.
(5) Load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder or Cassette.
(6) Press the Paper Feed Switch to select the paper source in which you loaded the paper.
(7) Click Print Check Pattern.
The nozzle check pattern is printed.
Do not perform any other operations until the nozzle check pattern finishes printing.
Note
z
Make sure that the Inner Cover is closed.
Cleaning the Print Head Without a Computer
z
The Print Head can also be cleaned from the printer itself, using the RESUME/CANCEL button. 
1. Make sure that the printer is on.
2. Hold down the RESUME/CANCEL button until the POWER lamp flashes green once, and 
then release it immediately.
Note
Clicking Initial Check Items displays the items to 
be checked before cleaning.
(3)
(4)