Canon pixma ip1800 Manual Do Utilizador

Página de 44
4
Preparing the Printer
EN
GL
ISH
Preparing the Printer
Be sure to read your setup sheet first for setting up your printer and getting it ready for use.
The diagrams and computer screens in your setup sheet refer to the iP2500 series. The operations 
are exactly the same with the iP1800 series, unless otherwise described.
Unpack the printer
Please confirm the included items against the illustration printed on the lid of the packing box.
1
Turn on the printer.
2
Prepare the FINE Cartridges.
3
Install the FINE Cartridges.
Be sure to use the printer with both Black and Color FINE Cartridges.
Otherwise, the printer cannot print. When either of ink runs out while printing, you can select 
to use either Color or Black ink as a printer driver setting. However you must use the printer 
with both Black and Color FINE Cartridges installed regardless of the printer driver setting.
Important
z
In Windows, do not connect the USB cable until after the software is installed.
z
A USB cable is necessary to connect the printer with your computer.
Caution
Be sure to remove the tapes and protective material before you turn on the printer.
Note
The tape or the protective material position is subject to change.
Caution
Do not touch internal parts other than the FINE Cartridge Holder.
Note
z
Do not touch the electrical contacts or Print Head Nozzles on a FINE Cartridge. The printer may 
not print out properly if you touch it.
z
Do not reattach the protective tape once it has been removed it.
z
Handle the removed protective tape carefully to avoid getting your hands dirty or staining 
surrounding work area.
Important
z
Make sure that all the FINE Cartridges are installed in the correct position. The printer cannot 
be used unless all the FINE Cartridges are installed.
z
Once you have installed the FINE Cartridges, the POWER lamp will flash green. Wait for about 
one to two minutes, until the POWER lamp stops flashing and remains lit green and the printer 
has stopped making operating noises, before proceeding.
Note
z
Do not drop or shake FINE Cartridges as this may cause the ink to leak out and stain your 
clothes and hands.
z
The ALARM lamp on the printer still flashes orange if a FINE Cartridge is not installed properly. 
Open the Front Cover and make sure that the position of all the FINE Cartridges is appropriate.