Samsung bn68-01780j-00 Manual Do Utilizador

1.  Press the tOOLS button. Then Press the ENtER  button to 

select "Anynet+(HDMI-CEC)". 

Press the ▲ or ▼ button to select "Receiver", then press the 

ENtER  button.

.  Press the ◄ or ► button to select to "On", then press the 

ENtER  button. 

Now you can listen to sound through the receiver.

.  Press the EXIt button to exit. 

When the receiver is set to On, you can listen to the TV sound 

through the 2-channel receiver.

If the receiver is exclusively for a home theatre only 

(supporting audio only), it may not appear in the device list.

In case of a content with copyright problem, listening through the receiver may not properly operate.

If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the 

power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again. 

(see page 23)

➣

➣

➣

➣

You can make a recording of a tV programme using a recorder.
Press the 

 button.

Recording begins. (Only when the Anynet+ enabled recording device is connected.)

The current TV programme is recorded in the Watching TV status. If you are watching video from 

another device, the video from the device is recorded.

You can also record the source streams by selecting 

Record after pressing the tOOLS button.

Before recording, check whether the antenna jack is properly connected to the recording device.  

For the antenna connection to the recording device, refer to its user manual.

➣

➣

➣













BN68-01780J.indb   66

2008-08-29   �� 11:06:51