Samsung bhm-1008 Manual Do Utilizador

17

•

Insert the Cuff Plug into the Cuff Plug Jack 
on the Monitor.

•

Pull the Velcro tab so the cuff is laying flat  

with the Velcro facing up at you.

•

Pull the cuff to the left of the metal ring to  

form an opening for your arm.

•

Put your left arm through the cuff loop.  

The bottom of the cuff should be approx.  
0.5 inch above your elbow. The cuff tube  
should run along the center of your arm  
towards your upturned palm.

•

If the cuff is properly positioned the tube  

should be running down your arm as in the  
illustration to the right.

•

Pull the cuff so that the top and bottom  

edges are snug around your arm. Do not  
tighten to the point of being uncomfortable.

•

When the cuff is positioned properly, 

press the Velcro firmly against the pile  
side of the cuff.

•

Sit in a chair and place your arm on the  

table so that the cuff is at the same level  
as your heart.

•

Relax your arm and sit with your palm facing

upward.

•

Assure there are no kinks in the air tube.