Samsung DCS 400si Manual Do Utilizador
17
CALL PROCESSING
SYSTEM HOLD
•
When you are connected to any call, press HOLD. The call will flash
green at your keyset. If this call appears on a line key at other keysets,
it will flash red at those keysets.
green at your keyset. If this call appears on a line key at other keysets,
it will flash red at those keysets.
•
To take the caller off hold, press that key and the green flashing light will
go steady green again. Resume the conversation.
go steady green again. Resume the conversation.
NOTE: While on a call, pressing a line key, route key or flashing CALL but-
ton will automatically put your first call on hold and connect you to the new
call. See Automatic Hold under Customizing Your Keyset.
ton will automatically put your first call on hold and connect you to the new
call. See Automatic Hold under Customizing Your Keyset.
EXCLUSIVE HOLD
To place an outside call on hold at your phone so that other users cannot get it:
•
•
Press the HOLD button twice. The call will flash green on your keyset
and this line will show a steady red light on other keysets.
and this line will show a steady red light on other keysets.
•
To retrieve the call, press the flashing green line button or press the
HOLD button a third time.
HOLD button a third time.
NOTE: Intercom calls will always be placed on exclusive hold.
REMOTE HOLD
When you wish to place a call on hold at another station. Press TRANSFER
and a dial the station number (or press the appropriate DSS key). Press the
HOLD key. This will place the call on system hold on an available CALL but-
ton or Line Key at the remote station and return you to dial tone.
and a dial the station number (or press the appropriate DSS key). Press the
HOLD key. This will place the call on system hold on an available CALL but-
ton or Line Key at the remote station and return you to dial tone.
NOTES:
1. If the destination station does not have any free CALL buttons or line
1. If the destination station does not have any free CALL buttons or line
keys you will hear No More Calls tone and must return to the other party
by pressing the TRANSFER key (or the RETURN soft key in the display).
by pressing the TRANSFER key (or the RETURN soft key in the display).
2. Intercom calls cannot be remote held.
HOLD RECALL
If you leave a call on hold longer than the hold timer, it will recall your sta-
tion. The button that the call appears on will have a slow flashing amber light.
tion. The button that the call appears on will have a slow flashing amber light.
•
When your phone rings, lift the handset or press the ANS/RLS key to an-
swer the recall.
swer the recall.
CALLING YOUR SYSTEM OPERATOR
•
Dial 0 to call your system operator or group of operators.
•
If you want to call a specific operator, dial that person’s extension num-
ber.
ber.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKER key before you begin dialing.
handset or press the SPEAKER key before you begin dialing.
16