Samsung DCS 400si Manual Do Utilizador

•

Redial the new passcode to verify. If successful, you will hear two beeps.
Four beeps indicate an incorrect code. Reenter the code again.

•

Press TRANSFER to store the new passcode.

You can receive internal calls in one of three modes (see Answering Intercom
Calls under Intercom Calls for descriptions):

•

While on-hook, press TRANSFER and then dial 103.

•

Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.

•

Press TRANSFER to store your selection.

NOTE: When your keyset is programmed for Auto Answer and you have For-
ward No Answer (FNA) turned on, you must answer screened transfers by
pressing the ANS/RLS key before your FNA timer expires or the call will for-
ward.

While on an outside call, pressing a line key, route key or a flashing CALL
button will automatically put your call on hold and connect you to the next
call. This feature can be turned on or off at your keyset.

•

With the handset on-hook, press TRANSFER and then dial 110.

•

Dial 001 to turn Automatic Hold on or 000 to turn it off.

•

Press TRANSFER to store your selection.

NOTE: Intercom calls can be automatically put on hold by pressing TRANS-

FER.

Keyset users can switch between headset mode and handset mode. When
using headset mode, press the ANS/RLS key to answer and release calls.

•

With the handset on-hook, press TRANSFER and then dial 110.

•

Dial 021 to use the headset or 020 to use the handset.

•

Press TRANSFER to store your selection.

Your keyset may be equipped with a Headset mode key. If it is so equipped
pressing this key while the light is out will cause the keyset to enter headset
mode and the light will illuminate to indicate this. Pressing the key while the
light is lit will cause the keyset to return to handset mode and the light will
go out.

41

40

This feature selects whether a station using Answer Machine Emulation will
hear their personal greeting or BGM while callers are listening to the per-
sonal greeting. A BGM source must be selected for this to work. This feature
only applies if there is a CADENCE card installed in the system and your key-
set has a programmed AME key.

•

While the handset is on-hook, press TRANSFER and then dial 110.

•

Press 091 to turn on AME BGM or 090 to turn it off.

•

Press TRANSFER to store your selection.

This feature allows people using the AME feature to enable password pro-
tection. This will prevent unauthorized people from listening to your mes-
sages being left. The passcode is the same as your station passcode. This
feature only applies if there is a CADENCE card installed in the system and
your keyset has a programmed AME key.

•

With the handset on-hook, press TRANSFER and then dial 110.

•

Dial 101 to turn on AME PASSCODE or 100 to turn it off.

•

Press TRANSFER to store your selection.

Each keyset user can select any one of eight ring frequencies:

•

While on-hook, press TRANSFER and then dial 111.

•

Dial 1–8 or press the UP and DOWN keys to hear each tone.

•

When you hear the tone that you prefer, press TRANSFER to save it.

From the factory, your station passcode is 1234. You can change your sta-
tion passcode whenever you desire. 

•

While on-hook, press TRANSFER and then dial 101.

•

Dial your old passcode.

•

Dial a new passcode (must be four characters). You can use 0–9.