Samsung dvd-p390k Manual Do Utilizador

reference

 

reference

Before requesting service (troubleshooting), please check the following.

No operations can be 
performed with the 
remote control.

•  Check the batteries in the remote control.  

 

    They may need replacing.
•   Operate the remote control at a distance of no more than 20 feet.
•   Remove batteries and hold down one or more buttons for several minutes 

to drain the microprocessor inside the remote control to reset it. Reinstall 
batteries and try to operate the remote control again.

P3

Disc does not play.

•  Ensure that the disc is installed with the label side facing up.
•  Check the region number of the DVD.

P5

The   icon appears 
on screen.

•   The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4.   You’ve requested a title or chapter number or search time that is out of range.

Disc Menu doesn’t appear.

•  Check if the disc has a Menu.

Play mode differs from 
the Setup Menu selection.

•   Some of the functions selected in the Setup Menu may not work properly if 

the disc is not encoded with the corresponding function.

P26 ~ 30

The screen ratio  
cannot be changed.

•  The Screen Ratio is fixed on your DVDs.

  P28 ~ 29

No audio

•   Make sure you have selected the correct Digital Output in the Audio 

Options Menu.

  P27 ~ 28

The screen is blocked

•   Press the 

 button (in front panel) for more than 5 seconds under no disc 

inside. All settings  will revert to the factory settings.

  P14

Forgot password

•   Press the 

 button (in front panel ) for more than 5 seconds 

   under no disc inside. All settings including the password  will revert 
   to the factory settings. Don't use this unless absolutely necessary.

P29 ~ 30

If you experience other 
problems.

•   Go to the contents and find the section of the instruction book that contains 

the explanations regarding the current problem, and follow the procedure 
once again.

•   If the problem still cannot be solved, please contact your nearest authorized 

service center.

The picture is noisy or 
distorted

•    Make sure that the disc is not dirty or scratched.

•    Clean the disc.

P2