Sony 3-300-703-11(2) Manual Do Utilizador

Press MENU/RETURN on CHANNEL A 
and BEAT SPEED simultaneously.

• The beat tempo input is canceled if you press 

any buttons other than BPM CONTROL.

• If you input the tempo less than BPM 40, 

“Hit Faster” appears in the display. Hit again 
in faster tempo.

• If you input the tempo more than BPM 200, 

“Hit Slower” appears in the display. Hit again 
in slower tempo.

• If the tempo of the beat pattern does not match 

the tempo of the music, change the speed 
manually after you input the tempo.

• You can use the drum pads and the beat 

function at the same time.

• You can transfer the sound of the drum pad or 

beat pattern onto a USB device using Manual 
Transferring only.

You can isolate the sound from 
CHANNEL A and B or blend them 
together using the Crossfader. By sliding 
the CROSS FADER slider from one 
position to another will vary the output 
signals of the CHANNEL A and B 
respectively.

You can monitor the audio source 
playback on CHANNEL A or B through a 
headphone without interruption of the 
sound output from the speakers. Monitor 
Cue allows you to seek for a point for 
sound mixing before you perform 
Crossfader.

Connect a headphone (not 
supplied) to i jack.

Be sure to turn the i LEVEL to MIN before 
you connect the headphone.

Press i CHANNEL SELECT 
repeatedly to select CHANNEL A or 
B.
The indicator for selected channel 
lights up.

Turn i LEVEL to adjust the volume 
level of the headphone.

• The sound output from the headphone is same 

as the input source.

• You cannot hear the sound from microphone 

and BEAT BLEND through a headphone.

• The headphone output will not affected by 

CROSS FADER slider position.

Listen to 
CHANNEL A 
only

Slide the CROSS FADER 
slider all the way to the 
left.

Listen to 
CHANNEL B 
only

Slide the CROSS FADER 
slider all the way to the 
right.

Mix the 
sound from 
CHANNEL A 
and B

Slide the CROSS FADER 
slider to the position 
which the percentage of 
audio sources you want to 
mix.