Sony 3-873-945-12 (1) Manual Do Utilizador

29

Using the encrypted transmission function

The transmitter searches for a receiver 
that it has been paired with. After the 
transmitter detects the receiver, the 
transmitter exchanges the encryption 
key with receiver and encrypted 
transmission begins.

Set this mode when multiple transmitters 
are paired with multiple receivers for 
encrypted transmission.
If both transmitters and receivers are set 
with the same user-designated password, 
the audio signal can be decoded. This mode 
is useful when multiple transmitters and 
receivers are used as a single group, or 
when the audio signal from one transmitter 
is received by multiple receivers at the same 
time.

Hold down the SET button until the 
item to be set flashes in the 
ENCRYPTION indication on the 
transmitter.

Press the + or – button repeatedly to 
select PASSWORD, and then press the 
SET button.

Input a password of up to eight 
characters on the transmitter.

To enter a password, use the procedure 
described in “Naming of transmitter (NAME)” 
on page 32.

Set the encrypted transmission 
function setting on the receiver to 
PASSWORD.

Set the same password that was set on 
the transmitter.

 

It is recommended that you change the 
password periodically.

USB cable (supplied)

USB adapter 
cable 
(supplied)