Sony a (alpha) dslr-a700 Manual Do Utilizador

See the “User’s Guide/Troubleshooting” (page 122)

Select [Date/Time setup] in the 

 Setup menu and perform the procedure in step 2-2 to -5.

Unless you set the clock, “Set date and time?” appears each time the camera is turned on. 

Set the POWER switch to OFF sliding in the arrow direction. Attach the lens cap. After you 
remove the lens, store the camera with the body cap attached.

If you do not operate the camera for about five seconds, the recording mode display on the 
LCD monitor disappears. Also, if you do not operate the camera for about three minutes, the 
camera turns to power saving mode and nearly shuts down (Power Save). To cancel the power 
save, operate the camera, for example, by pressing the shutter button halfway down.

• You can change the time that must elapse to activate the function (the default settings are [5 sec]/[3 min]). 

t “User’s Guide/Troubleshooting” (page 120)

You can change the screen display to show messages in a specified language. To change the 
language setting, follow the procedure below.

1 Press MENU to display the menu.

2 Select [

] 

t

 [1] with b/B on the multi-selector.

3 Select [

 Language] with v/V on the multi-selector, then press the center of the multi-

selector.

4 Select the desired language with v/V on the multi-selector, then press the center of the 

multi-selector.