Sony bravia 4-109-032-11(1) Manual Do Utilizador

 GB

4 HDMI IN 1 or 2

Digital video and audio signals are input from the connected 
equipment.
In addition, when you connect the equipment that is 
compatible with control for HDMI, communication with the 
connected equipment is supported. Refer to page 30 to set up 
this communication.
If the equipment has a DVI socket, connect the DVI socket to 
the HDMI IN 2 socket through a DVI - HDMI adaptor 
interface (not supplied), and connect the equipment’s audio 
out sockets to the audio in sockets in the HDMI IN 2 sockets.

~

• The HDMI sockets support the following video inputs only: 

480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p. 
For PC video inputs, see page 36.

• Be sure to use an HDMI cable that bears the HDMI logo.
• When connecting an audio system that is compatible with 

control for HDMI, be sure to also connect it to the 
DIGITAL AUDIO OUT (OPTICAL) socket.

9 HDMI IN 3

5 

It is recommended to use a PC cable with ferrites like the 
“Connector, D-sub 15” (ref. 1-793-504-11, available in Sony 
Service Centre), or equivalent.

6 DIGITAL 
AUDIO OUT 
(OPTICAL)
(except for KDL-
40S40xx/40U40xx)

Use an optical audio cable.

7 

You can listen to TV sound on the connected Hi-Fi audio 
equipment.

8 CAM 
(Conditional 
Access Module)

Provides access to pay TV services. For details, refer to the 
instruction manual supplied with your CAM.
To use the CAM, remove the “dummy” card from the CAM 
slot, then turn off the TV and insert your CAM card into the 
slot. When you are not using the CAM, we recommend that 
you keep the “dummy” card in the CAM slot.

~

• CAM is not supported in some countries/areas. Check with 

your authorised dealer.

0 AV3, 

When connecting mono equipment, connect to the 

AV3 L 

socket.

qa i Headphones

You can listen to TV sound through headphones.