Sony bravia kdl-26u40xx Manual Do Utilizador

 GB

~
“Brightness”, “Colour”, “Sharpness” and “Adv. Contrast Enhancer” are not available when “Picture Mode” is set to “Vivid” 

or when “Display Mode” is set to “text”. 

Selects the picture mode except for PC input source.

“Vivid”: (“Shop”, see page 6). For enhanced picture contrast and sharpness.

“Standard”: (“Home”, see page 6). For standard picture. Recommended for 

home entertainment.

“Cinema”: For viewing film-based content. Most suitable for viewing in a the-

atre-like environment. This picture setting was developed in collaboration with 

Sony Pictures Entertainment to faithfully reproduce movies as intended by their 

creators.
Selects the display mode for PC input source.

“Video”: For video images.

“Text”: For text, charts or tables.

Adjusts the brightness of the backlight.

Increases or decreases picture contrast.

Brightens or darkens the picture.

Increases or decreases colour intensity.

Increases or decreases the green tones.

z

“Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).

Sharpens or softens the picture.

Adjusts the whiteness of the picture.
“Cool”: Gives the white colours a blue tint.
“Neutral”: Gives the white colours a neutral tint.
“Warm”: Gives the white colours a red tint. 

z

“Warm” can not be selected when you set “Picture Mode” to “Vivid”.

Reduces the picture noise (snowy picture) in a weak broadcast signal. 
“Auto”: Automatically reduces the picture noise (in analogue mode only).
“High/Mid/Low”: Modifies the effect of the noise reduction.
“Off”: Turns off the “Noise Reduction” feature.

z

“Auto” is not available for HDMI 1, HDMI 2, HDMI 3,  COMP and PC mode.

Automatically adjusts “Backlight” and “Contrast” to the most suitable settings 

judging from the brightness of the screen. This setting is especially effective for 

dark images scenes. It will increase the contrast distinction of the darker picture 

scenes.

Resets all picture settings except “Picture Mode” and “Display Mode” (only in 
PC mode) to the factory settings.

010COV.book  Page 20  Friday, July 4, 2008  12:56 PM