Sony bravia kdl-40lx903 Manual Do Utilizador

GB

For product protection and safety reasons, Sony strongly recommends that installing of your TV be 
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.

Provide full attention to safety during the installation, periodic maintenance and examination of this 
product.

Your TV can be installed using the SU-WL500 (KDL-60LX903 only), or SU-WL700 (except KDL-
60LX903) Wall-Mount Bracket (sold separately).
•

Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the 
installation.

•

Refer to “Detaching the Table-Top Stand from the TV” (page 7).

~

• When installing the TV on a wall, remove the four screws from the rear of the TV. (They are fastened in the 

screw holes for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from 
children.

• Attach the Mounting Hook using the supplied four spacers and four M6 × 20 screws.
• Place the TV on the Table-Top Stand, when securing the Mounting Hook.
• Remove the bottom cover and terminal cover first before detaching the Table-Top Stand. See step 4 (page 18) 

for details.

• When attaching the Table-Top Stand again, be sure to fasten the four screws (previously removed) to the 

original holes on the rear of the TV.

Sufficient expertise is required for installing this product, especially to determine the strength of 
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the 
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the 
installation. Sony is not liable for any damage or injury caused by mishandling or improper 
installation.

Mounting Hook

Screw (M6 × 20)

Spacer