Sony bravia kdl-40v58xx Manual Do Utilizador

 GB

C:\Documents and Settings\All Users\Documentos\SONY 
TELES\2009\(08-05)SATELLITE-EX2L(Fact)\PAPER 
Satellite\SateliteKDL52W55xx_UK\100ADD.fm

KDL-52/46/40/37/32V5500

x-xxx-xxx-xx(x)

Changes on the server are not 

being applied or displayed 

content differs from content 

on the server.

• Sometimes changes are not applied to displays on the TV even though 

content has been added and/or deleted on the server. If this happens, go 

back up one level and try opening the folder or server again.

Photo, music and/or video 

files do not appear or icons are 

not displayed.

• Check that the connected device supports DLNA.

• Operations are not guaranteed for all servers. Also, operations differ 

depending on the features of the server and the content in question.

• Turn the connected device on.

• Check that the LAN cable and/or mains lead/AC power cord of the 

server has not become disconnected.

• Check that the connected device is registered under “Server Display 

Settings”.

• Check that the server is correctly configured.

• Check that the selected device is connected to the network and can be 

accessed.

• If the “IP Address Settings” in “Network” under “Network Settings” is 

set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take 

some time to recognise devices if there is no DHCP server. Execute 

“Server Diagnostics”.

The TV cannot be found from 

renderer-compatible device 

(the controller).

• Check that the LAN cable and/or mains lead of the server has not 

become disconnected.

• Check if the “Renderer Function” is activated.

• Check that the connected device is registered under “Renderer Access 

Control”.

Only a few icons appear under 

the "Network" in the Home 

Menu.

• This is normal when internet connection is not available.

You can use three pre-installed Widgets properly. To enjoy more 

Widgets, please check that the LAN cable and/or mains lead/AC power 

cord of the router/modem has not become disconnected. (*)

You have been using 

registered Widgets, but now 

some contents won't appear on 

the Widgets.

• Check that the LAN cable and/or mains lead/AC power cord of the 

router/modem has not become disconnected. (*)

• There's a possibility that the Widget Provider's server is out of service. 

Please try using the Widget later.

(*) Your router/modem must be properly set to connect to the internet in 

advance. Please contact your Internet Service Provider for the router/

modem settings.

Auto Setup (freesat) is 

stopped before it is completed.

• Check connections and dish alignment. The dish needs to be pointing at 

Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East.

• If the problem persists, consult your freesat registered retailer or call 

Freesat (UK) Ltd on 0844 881 6700 or visit www.freesat.co.uk.

Some programmes cannot be 

tuned.

• Check the aerial or dish.

• The satellite cable might be short-circuited or there might be connection 

problems of the cable. Please check the cable and connection and then 

turn the TV Off with the Mains power On / Off switch, and turn it On 

again.

• The frequency you entered is out of range. Please consult the received 

satellite broadcasting company.

Distorted picture and/or 

sound.

• Keep the TV away from electrical noise sources such as cars, 

motorcycles, hair-dryers or optical equipment.

• When installing optional equipment, leave some space between the 

optional equipment and the TV.

• Check the aerial/cable connection.

• Keep the aerial/cable TV cable away from other connecting cables.

010COV.book  Page 25  Friday, September 25, 2009  4:36 PM