Sony cd-dvd player dvp-cx777es-b Manual Do Utilizador

Página de 108
96
Be sure to change the value in the Setup 
Display each time you move the speakers. 
Start from the front speaker. The default 
adjustments are in parentheses.
Note
If each of the front or rear speakers are not placed at 
an equal distance from your listening position, set 
the distance according to the closest speaker.
◆ LEVEL (FRONT)
Varies the level of the front speakers. Be sure 
to set “TEST TONE” to “ON” for easy 
adjustment.
The default adjustments are in parentheses.
◆ LEVEL (REAR)
Varies the level of the rear speakers. Be sure 
to set “TEST TONE” to “ON” for easy 
adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the speakers at 
one time
Use the amplifier’s (receiver’s) volume 
control.
◆ TEST TONE
The speakers will emit a test tone. Use this 
when you use the 5.1CH OUTPUT jacks and 
adjust “LEVEL (FRONT)” and “LEVEL 
(REAR).”
FRONT 
(10 ft)
Set this between 4 and 50 
feet in 0.25 foot 
increments.
CENTER (10 ft)
Set this within ±6 feet of 
the “FRONT” setting in 
0.25 foot increments. For 
example, if “FRONT” is set 
to 6 feet, “CENTER” can 
be set between 0 and 12 
feet.
REAR (10 ft)
Set this within –18 feet and 
+6 feet of the “FRONT” 
setting in 0.25 foot 
increments. For example, if 
“FRONT” is set to 18 feet, 
“REAR” can be set 
between 0 and 24 feet.
SUBWOOFER 
(10 ft)
Set this within –18 and +6 
feet of the “FRONT” 
setting in 0.25 foot 
increments. For example, if 
“FRONT” is set to 18 feet, 
“REAR” can be set 
between 0 and 24 feet.
B
D
A
A
C
C
(4~50 ft)
(4~50 ft)
L (0 dB)
Set this between –6 dB and 0 
dB in 0.5 dB increments.
R (0 dB)
Set this between –6 dB and 0 
dB in 0.5 dB increments.
CENTER 
(0 dB)
Set this between –12 dB and 
0 dB in 0.5 dB increments.
SUBWOOFER 
(DVD: –5 dB/
SUPER 
AUDIO CD: 
0 dB)
(When “SIZE” is set to the 
default settings):
Set this between –10 dB 
and +10 dB in 0.5 dB 
increments.
(When “SIZE” is not set to 
the default settings):
Set this between –15 dB 
and +5 dB in 0.5 dB 
increments.
L (0 dB)
Set this between –12 dB and 
0 dB in 0.5 dB increments.
R (0 dB)
Set this between –12 dB and 
0 dB in 0.5 dB increments.
OFF
The test tone is not emitted 
from the speakers.
ON
The test tone is emitted from 
each speaker in sequence.