Sony CDX-F5500X Manual Do Utilizador

Página de 84
20
Changing the operative direction
The operative direction of controls is factory-set 
as shown below.
If you need to mount the rotary commander on 
the right hand side of the steering column, you 
can reverse the operative direction.
Press (SEL) for 2 seconds while 
pushing the VOL control.
Adjusting the sound 
characteristics
You can adjust the balance, fader, low pass filter 
and subwoofer volume.
1
Press the select button repeatedly 
until “BAL,” “FAD,” “LPF” or “SUB” 
appears.
Each time you press the select button, the 
item changes as follows:
LOW*
1
 
t
 
MID*
1
 
t
 
HI*
1
 
BAL (left-right) 
FAD (front-rear) 
LPF (low pass filter)*
2
*
3
 
SUB (subwoofer volume)*
2
*
4
*1 When EQ3 is activated (page 22).
*2 When “SUB” is selected (page 21).
*3 The cut off frequency is adjustable to 78 Hz, 
125 Hz or OFF.
*4 The volume level is adjustable between –10 
and +10 steps. (Below –10, “ATT” is displayed.)
2
Rotate the volume control dial to 
adjust the selected item.
Note
Adjust within 3 seconds after selecting the item. 
Quickly attenuating the 
sound 
(With the rotary commander or the card 
remote commander)
Press (ATT).
After “ATT-ON” momentarily appears, 
“ATT” appears in the display.
To restore the previous volume level, press 
(ATT) again.
Tip
When the interface cable of a car telephone is 
connected to the ATT lead, the unit decreases the 
volume automatically when a telephone call comes in 
(Telephone ATT function).
To increase
To decrease