Sony CDX-M800
21
Adjusting the sound
characteristics
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
and subwoofer volume.
1
Press
(SOUND)
repeatedly to select
the desired item.
Each time you press (SOUND), the item
changes as follows:
changes as follows:
BASS (bass)
t
TREBLE (treble)
t
BALANCE (left-right)
t
FADER (front-rear)
t
SUB (subwoofer volume)
2
Adjust the level of a selected item by
pressing
pressing
<
or
,
.
When adjusting with the rotary commander,
press (SOUND) and rotate the VOL control.
press (SOUND) and rotate the VOL control.
After 3 seconds, the display returns to the
normal play mode.
normal play mode.
Note
Adjust within 3 seconds after selecting the item.
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
sound
(With the rotary commander or the card
remote commander)
remote commander)
Press
(ATT)
.
“ATT on” appears in the display momentarily.
To restore the previous volume level, press
(ATT) again.
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
Changing the sound and
display settings
display settings
— Menu
The following items can be set:
Set up
• Clock Adjust (page 8)
• CT (Clock Time) (page 19)
• Beep — to turn the beeps on or off.
• AUX-A (page 25) — to turn the AUX source
• CT (Clock Time) (page 19)
• Beep — to turn the beeps on or off.
• AUX-A (page 25) — to turn the AUX source
display on or off.
Display
• Clock (Clock Information) — to display the
clock and the play mode at the same time (on).
• A.IMG (Auto Image) (page 24) — to step
through the display images of one or all display
modes.
modes.
• Demo (Demonstration) — to turn the
Demonstration mode on or off.
– Select “on” to activate Demo display.
– Select “off” to deactivate the Demonstration
– Select “on” to activate Demo display.
– Select “off” to deactivate the Demonstration
mode.
• Info (Display Information) — to display the
display items (depending on the source, etc.) at
the bottom of the display while a display image
is displayed:
– Select “on” to display the display items, and
the bottom of the display while a display image
is displayed:
– Select “on” to display the display items, and
by pressing (DSPL/PTY), the display item
will change.
will change.
– Select “off” to not display any display items.
• Dimmer — to change the brightness of the
display.
– Select “Auto” to dim the display only when
– Select “Auto” to dim the display only when
you turn the lights on.
– Select “on” to dim the display.
– Select “off” to deactivate the Dimmer.
– Select “off” to deactivate the Dimmer.
• Contrast* — to adjust the contrast if the
indications on the display are not recognizable
because of the unit’s installation position.
because of the unit’s installation position.
• BlackOut — to blacken the display, while the
operation mode is on.
– Select “on” to black out the indications.
– Select “on” to black out the indications.
The indications will disappear, but the unit
will react if you press any button.
will react if you press any button.
– Select “off” to brighten the display.
• A.Scroll (Auto Scroll)
– Select “on” to scroll all automatically
displayed names exceeding 12 characters.
– When Auto scroll is set to off and the disc/
track/album is changed, the disc/track/album
name or ID3 tag does not scroll.
name or ID3 tag does not scroll.
*
“Contrast” appears only in the sub display window.
You can adjust the contrast of the sub display
window only.
You can adjust the contrast of the sub display
window only.
continue to next page
t