Sony CDX-L490B Manual Do Utilizador

Página de 52
17
Error displays/Messages
If these solutions do not help improve the 
situation, consult your nearest Sony dealer.
Radio reception
Preset tuning is not possible.
• Store the correct frequency in the memory.
• The broadcast signal is too weak.
The stations cannot be received.
The sound is hampered by noises.
• Connect a power aerial control lead (blue) or 
accessory power supply lead (red) to the 
power supply lead of a car’s aerial booster. 
(Only when your car has built-in FM/AM 
aerial in the rear/side glass.)
• Check the connection of the car aerial.
• The auto aerial will not go up.
t Check the connection of the power aerial 
control lead.
• Check the frequency.
Automatic tuning is not possible.
• The local seek mode is set to “ON.”
t Set the local seek mode to “OFF” (page 
• The broadcast signal is too weak.
t Perform manual tuning.
The “ST” indication flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
t Set the monaural reception mode to 
“ON” (page 11).
A programme broadcast in stereo is heard 
in monaural.
The unit is in monaural reception mode.
t Cancel monaural reception mode (page 
11).
Error displays
The following indications will flash for about 5 
seconds, and an alarm sound will be heard.
Err04
A CD is dirty or inserted upside down.
t Clean or insert the CD correctly.
Err99
The CD unit cannot be operated because of 
some problem.
t Press the RESET button on the unit.
Messages
” or  “
You have reached the beginning or the end of 
the disc and you cannot go any further.