Sony CHC-CL5MD Manual Do Utilizador
39
Tape – Recording
Recording an MD on a
tape
tape
— MD-TAPE Synchro Recording
1
Load a blank tape.
2
Load an MD.
3
Press SYNCHRO MODE repeatedly until
“MD
“MD
t
TAPE SYNC?” appears.
4
Press ENTER/START.
The tape deck stands by for recording and
the MD deck pauses for play.
the MD deck pauses for play.
5
Press ENTER/START.
MD playing and tape recording start.
To stop recording
Press x.
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
recording stops at the end of the bottom side.
• If you select both sides recording and the tape
reaches the end of the top side part-way through a
track, the entire track is recorded again from the
beginning of the bottom side.
track, the entire track is recorded again from the
beginning of the bottom side.
• You can record only your favourite MD tracks with
Programme Play. After step 2, follow the same
procedures as step 1 to 5 in “Programming MD
tracks” on page 15. Then, go to step 3.
procedures as step 1 to 5 in “Programming MD
tracks” on page 15. Then, go to step 3.
Note
If the tape becomes full during recording, the MD
deck and the tape deck stop automatically.
deck and the tape deck stop automatically.
Recording on a tape
manually
manually
— Manual Recording
You can record just the portions you like from
a CD or an MD on a tape. You can also record
a radio programme.
a CD or an MD on a tape. You can also record
a radio programme.
The recording level is automatically adjusted.
1
Load a blank tape.
2
Press FUNCTION repeatedly to select
the desired source to record.
the desired source to record.
3
Press TAPE REC PAUSE/START.
The tape deck stands by for recording.
When you want to record on the bottom
side, press TAPE n N.
When you want to record on the bottom
side, press TAPE n N.
4
Press PLAY MODE/DIRECTION
repeatedly until
repeatedly until
g
appears to record
on one side or
h
(or
j
) to record on
both sides.
5
Press TAPE REC PAUSE/START and
then start playing the desired source to
record.
then start playing the desired source to
record.
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
recording stops at the end of the bottom side.
• If you select both sides recording and the tape
reaches the end of the top side part-way through a
track, the entire track is recorded again from the
beginning of the bottom side.
track, the entire track is recorded again from the
beginning of the bottom side.