Sony CMT-CP101
7
GB
CMT-CP101 4-2414-514-11 (1)
Getting Started
3 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
power line voltage.
110V-120V
220V-240V
VOLTAGE
SELECTOR
4 Connect the power cord to a wall outlet.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press @/1.
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press @/1.
Inserting two size-AA (R6)
batteries into the remote
control
batteries into the remote
control
E
E
e
e
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to prevent possible damage from
battery leakage and corrosion.
remove the batteries to prevent possible damage from
battery leakage and corrosion.
Setting the clock
1
Turn on the system.
2
Press TIMER SET on the remote.
3
Press ./> on the remote
repeatedly to set the hour.
repeatedly to set the hour.
4
Press ENTER on the remote.
The minute indication flashes.
5
Press ./> on the remote
repeatedly to set the minute.
repeatedly to set the minute.
6
Press ENTER on the remote.
The clock will begin operating.
To adjust the clock
1
Press TIMER SET on the remote.
2
Press . or > on the remote to select
“SET CLOCK”, then press ENTER on the
remote.
“SET CLOCK”, then press ENTER on the
remote.
3
Do the same procedures as step 3 to 6
above.
above.