Sony CMT-DF1 Manual Do Utilizador
O
p
tion
al Com
pon
ents
35
GB
Notes
• When playing MP3 files, sound is not output from
the DIGITAL OUT (OPTICAL) jack.
• You can record digital audio from this system only
when DVD function is selected.
• You cannot make a digital recording of a copy
guarded disc using a digital component connected to
this system. Also, playback may not be possible
depending on the connected component.
this system. Also, playback may not be possible
depending on the connected component.
• When you connect a component that does not support
Dolby Digital or DTS to the DIGITAL OUT
(OPTICAL) jack and output a Dolby Digital or DTS
bit stream, noise may be heard from the connected
component.
(OPTICAL) jack and output a Dolby Digital or DTS
bit stream, noise may be heard from the connected
component.
1
Connect a digital optical cord.
2
Connect 6 speakers to an AV amplifier
equipped with a decoder.
equipped with a decoder.
For the speaker placement, refer to the
operating instructions supplied with the
connected amplifier.
operating instructions supplied with the
connected amplifier.
3
Press SETUP in stop mode.
The Setup Menu appears.
4
Press
< or , repeatedly to select
“Audio Setup Page,” then press
ENTER.
ENTER.
5
Press
M or m repeatedly to select
“SPDIF Setup,” then press ENTER.
“SPDIF Output” appears.
6
Press ENTER.
7
Press
M or m repeatedly to select
“SPDIF/RAW,” then press ENTER.
8
Press SETUP to turn off the Setup
Menu.
Menu.
9
Switch the output to 5.1 channel Dolby
Digital sound or 5.1 channel DTS
sound.
Digital sound or 5.1 channel DTS
sound.
Enjoying the 5.1 channel
sound with the optional
amplifier
sound with the optional
amplifier