Sony CMT-MD1 Manual Do Utilizador
8
Step 2: Setting the
time
time
You must set the time before you use the
timer functions.
timer functions.
The clock is on a 24-hour system for the
European model, and a 12-hour system for
other models.
The European model is used for illustration
purpose.
European model, and a 12-hour system for
other models.
The European model is used for illustration
purpose.
1
Press CLOCK/TIMER SET while
the power is off.
the power is off.
The clock appears and the hour
indication flashes.
indication flashes.
2
Press +/– to set the hour.
=
+
(
P
p
1
/
u
–
+
–
+
–
+
=
+
(
P
p
2,4
3,5
1
3
CURSOR ?
:
0
0 0
3
Press ENTER/YES or CURSOR /.
The minute indication flashes.
:
1
0 0
1
4
Press +/– to set the minute.
5
Press ENTER/YES.
The clock starts.
If you have made a mistake
Press CURSOR ? or / repeatedly so that
the incorrect item flashes, then set it again.
the incorrect item flashes, then set it again.
To change the preset time
You can change the preset time while the
power is on.
power is on.
1 Press CLOCK/TIMER SET.
2 Press +/– repeatedly until “CLOCK SET ?”
2 Press +/– repeatedly until “CLOCK SET ?”
appears.
3 Press ENTER/YES.
4 Repeat steps 2 through 5.
4 Repeat steps 2 through 5.
Tips
• The built-in clock shows the time in the display
while the power is off.
• The upper dot flashes for the first half of a minute
(0 to 29 seconds), and the lower dot flashes for the
last half of a minute (30 to 59 seconds).
last half of a minute (30 to 59 seconds).