Sony CMT-DX2D Manual Do Utilizador
42
GB
Use buttons on the unit for the operation.
1
Connect audio cords.
2
Turn the VOLUME control towards – to
turn down the volume.
turn down the volume.
3
Press TV to switch the function to TV.
4
Start playing the connected
component.
component.
5
Turn the VOLUME control to adjust the
volume.
volume.
1
Connect a digital optical cord.
2
Connect 6 speakers to an AV amplifier
equipped with a decoder.
equipped with a decoder.
For the speaker placement, refer to the
operating instructions supplied with the
connected amplifier.
operating instructions supplied with the
connected amplifier.
3
Press
DISPLAY in stop mode.
The Setup Display appears.
4
Press
< or , repeatedly to select
“AV,” then press ENTER.
5
Press
M or m repeatedly to select
“Dolby Digital” or “DTS,” then press
ENTER.
ENTER.
6
Press
M or m repeatedly to select “Bit
Stream,” then press ENTER.
7
Press
DISPLAY to turn off the Setup
Display.
8
Switch the output to 5.1 channel Dolby
Digital sound or 5.1 channel DTS
sound.
Digital sound or 5.1 channel DTS
sound.
Listening to audio from a
connected component
connected component
Enjoying the 5.1 channel
sound with the optional
amplifier
sound with the optional
amplifier