Sony CMT-HX80R Manual Do Utilizador

CMT-HX80R.GB.3-452-364-11(1)

Make sure the power cord and 

speaker cords are correctly and firmly 

connected.

Find your problem in the checklist 

below, and take the indicated 

corrective action. 

If the issue persists, contact your 

nearest Sony dealer.

Immediately unplug the power cord, 

and check the following items.

 If your system has a voltage 

selector, is the voltage selector set to 

the correct voltage?

 Are you using only the supplied 

speakers?

 Is anything blocking the ventilation 

holes on the top or back of the 

system?

After the STANDBY indicator 



 

stops flashing, reconnect the power 

cord, and turn on the system. If the 

issue persists, contact your nearest 

Sony dealer.

unbalanced.
 Place the speakers as symmetrically as 

possible.

 Connect only the supplied speakers.

Severe hum or noise.
 Move the system away from sources of 

noise.

 Connect the system to a different wall 

socket.

 Install a noise filter (available 

separately) to the power cord.

The remote does not function.
 Remove any obstacles between the 

remote and the remote sensor 



 on 

the unit, and position the unit away 

from fluorescent lights.

 Point the remote at the system’s sensor.

 Move the remote closer to the system.
The STANDBY indicator



after unplugging the power cord.
 The STANDBY indicator 



 may not 

turn off immediately after unplugging 

the power cord. This is not a 

malfunction. The indicator will turn off 

after about 40 seconds.

play.
 Wipe the disc clean, and replace it.

 Move the system to a location away 

from vibration (for example, on top of 

a stable stand).

 Move the speakers away from the 

system, or place them on separate 

stands. At high volume, speaker 

vibration may cause the sound to skip.